Canopy attached to skirt, fitted, and frame is built

As of the Sunday the 2nd of October, 2016, the canopy has been secured to the canopy skirt with 3M 5200.  It looks very good and you will see it with the clecos still in place as I had to wait at least 72 hours for the stuff to cure.  I will probably continue on the process on Sunday the 9th.  This canopy has been fitted to the fuselage with good results and the frame that attaches it to the fuselage has been built.  The following are some photos of those accomplishments.

dsc_0001

All gooed up.

dsc_0003

All cleaned up from the excess goo.

6_12_2016-_-canopy_23

Fitted before it was secured with the 5200

2016-08-06_canopy_05

Frame built.